Sparksee  5.2.0
STSGraph Class Reference

Graph class. More...

Inheritance diagram for STSGraph:
Inheritance graph
Collaboration diagram for STSGraph:
Collaboration graph

Instance Methods

(int) - createNodeType:
 Creates a new node type.
 
(long long) - createNode:
 Creates a new node instance.
 
(int) - createEdgeType:directed:neighbors:
 Creates a new edge type.
 
(int) - createRestrictedEdgeType:tail:head:neighbors:
 Creates a new restricted edge type.
 
(long long) - createEdge:tail:head:
 Creates a new edge instance.
 
(long long) - createEdgeWithAttributes:tailAttr:tailV:headAttr:headV:
 Creates a new edge instance.
 
(long long) - countNodes
 Gets the number of nodes.
 
(long long) - countEdges
 Gets the number of edges.
 
(STSEdgeData *) - getEdgeData:
 Gets information about an edge.
 
(long long) - getEdgePeer:node:
 Gets the other end for the given edge.
 
(void) - drop:
 Drops the given OID.
 
(void) - dropWithObjects:
 Drops all the OIDs from the given collection.
 
(int) - getObjectType:
 Gets the Sparksee node or edge type identifier for the given OID.
 
(int) - createAttribute:name:dt:kind:
 Creates a new attribute.
 
(int) - createAttributeWithDefault:name:dt:kind:defaultValue:
 Creates a new attribute with a default value.
 
(int) - createSessionAttribute:dt:kind:
 Creates a new Session attribute.
 
(int) - createSessionAttributeWithDefault:dt:kind:defaultValue:
 Creates a new Session attribute with a default value.
 
(void) - setAttributeDefaultValue:value:
 Sets a default value for an attribute.
 
(void) - indexAttribute:kind:
 Updates the index of the given attribute.
 
(void) - getAttributeInValue:attr:value:
 Gets the Value for the given attribute and OID.
 
(STSValue *) - getAttributeWithOid:attr:
 Gets the Value for the given attribute and OID.
 
(STSTextStream *) - getAttributeText:attr:
 Gets the read-only TextStream for the given text attribute and OID.
 
(void) - setAttributeText:attr:tstream:
 Sets the writable TextStream for the given text attribute and OID.
 
(void) - setAttribute:attr:value:
 Sets the Value for the given attribute and OID.
 
(STSAttributeStatistics *) - getAttributeStatistics:basic:
 Gets statistics from the given attribute.
 
(long long) - getAttributeIntervalCount:lower:includeLower:higher:includeHigher:
 Gets how many objects have a value into the given range for the given attribute.
 
(int) - findType:
 Gets the Sparksee type identifier for the given type name.
 
(STSType *) - getType:
 Gets information about the given type.
 
(void) - removeType:
 Removes the given type.
 
(void) - renameTypeWithName:newName:
 Renames a type.
 
(void) - renameType:newName:
 Renames a type.
 
(int) - findAttribute:name:
 Gets the Sparksee attribute identifier for the given type identifier and attribute name.
 
(STSAttribute *) - getAttribute:
 Gets information about the given attribute.
 
(void) - removeAttribute:
 Removes the given attribute.
 
(void) - renameAttribute:newName:
 Renames an attribute.
 
(long long) - findObject:value:
 Finds one object having the given Value for the given attribute.
 
(long long) - findOrCreateObject:value:
 Finds one object having the given Value for the attribute or it creates one does not exist any.
 
(STSObjects *) - selectWithType:
 Selects all OIDs belonging to the given type.
 
(STSObjects *) - selectWithAttrValue:cond:value:
 Selects all OIDs satisfying the given condition for the given attribute.
 
(STSObjects *) - selectWithAttrValues:cond:lower:higher:
 Selects all OIDs satisfying the given condition for the given attribute.
 
(STSObjects *) - selectWithAttrValueRestriction:cond:value:restriction:
 Selects all OIDs satisfying the given condition for the given attribute.
 
(STSObjects *) - selectWithAttrValuesRestriction:cond:lower:higher:restriction:
 Selects all OIDs satisfying the given condition for the given attribute.
 
(STSObjects *) - explode:etype:dir:
 Selects all edges from or to the given node OID and for the given edge type.
 
(STSObjects *) - explodeWithObjects:etype:dir:
 Selects all edges from or to each of the node OID in the given collection and for the given edge type.
 
(long long) - degree:etype:dir:
 Gets the number of edges from or to the given node OID and for the given edge type.
 
(STSObjects *) - neighbors:etype:dir:
 Selects all neighbor nodes from or to the given node OID and for the given edge type.
 
(STSObjects *) - neighborsWithObjects:etype:dir:
 Selects all neighbor nodes from or to each of the node OID in the given collection and for the given edge type.
 
(STSObjects *) - edges:tail:head:
 Gets all the edges of the given type between two given nodes (tail and head).
 
(long long) - findEdge:tail:head:
 Gets any of the edges of the given type between two given nodes (tail and head).
 
(long long) - findOrCreateEdge:tail:head:
 Gets any of the edges of the specified type between two given nodes (tail and head).
 
(STSObjects *) - tails:
 Gets all the tails from the given edges collection.
 
(STSObjects *) - heads:
 Gets all the heads from the given edges collection.
 
(void) - tailsAndHeads:tails:heads:
 Gets all the tails and heads from the given edges collection.
 
(STSTypeList *) - findNodeTypes
 Gets all existing Sparksee node type identifiers.
 
(STSTypeList *) - findEdgeTypes
 Gets all existing Sparksee edge type identifiers.
 
(STSTypeList *) - findTypes
 Gets all existing Sparksee node and edge type identifiers.
 
(STSAttributeList *) - findAttributes:
 Gets all existing Sparksee attribute identifiers for the given type identifier.
 
(STSAttributeList *) - getAttributes:
 Gets all Sparksee attribute identifiers with a non-NULL value for the given Sparksee OID.
 
(STSValues *) - getValues:
 Gets the Value collection for the given attribute.
 
(void) - dumpData:
 Dumps logical data to a file.
 
(void) - dumpStorage:
 Dumps internal storage data to a file.
 
(void) - exportGraph:type:em:
 Exports the Graph.
 
(void) - backup:
 Dumps all the data to a backup file.
 

Detailed Description

Graph class.

Each Database has a Graph associated, which is the persistent graph which contains all data stored into the graph database and is retrieved from a Session.

Check out the 'API' and the 'SPARKSEE graph database' sections in the SPARKSEE User Manual for more details on the use of this class.

Author
Sparsity Technologies http://www.sparsity-technologies.com

Method Documentation

- (void) backup: (NSString *)  file

Dumps all the data to a backup file.

See the Sparksee class Restore method.

Parameters
file[in] Output backup file path.
Exceptions
System.IO.IOExceptionIf the given file cannot be created.
System.ApplicationExceptionnull
- (long long) countEdges

Gets the number of edges.

Returns
The number of edges.
- (long long) countNodes

Gets the number of nodes.

Returns
The number of nodes.
- (int) createAttribute: (int)  type
name: (NSString *)  name
dt: (enum STSDataType)  dt
kind: (enum STSAttributeKind)  kind 

Creates a new attribute.

Parameters
type[in] Sparksee node or edge type identifier.
name[in] Unique name for the new attribute.
dt[in] Data type for the new attribute.
kind[in] Attribute kind.
Returns
Unique Sparksee attribute identifier.
- (int) createAttributeWithDefault: (int)  type
name: (NSString *)  name
dt: (enum STSDataType)  dt
kind: (enum STSAttributeKind)  kind
defaultValue: (STSValue *)  defaultValue 

Creates a new attribute with a default value.

Parameters
type[in] Sparksee node or edge type identifier.
name[in] Unique name for the new attribute.
dt[in] Data type for the new attribute.
kind[in] Attribute kind.
defaultValue[in] The default value to use in each new node/edge.
Returns
Unique Sparksee attribute identifier.
- (long long) createEdge: (int)  type
tail: (long long)  tail
head: (long long)  head 

Creates a new edge instance.

Parameters
type[in] Sparksee type identifier.
tail[in] Source Sparksee OID.
head[in] Target Sparksee OID.
Returns
Unique OID of the new edge instance.
- (int) createEdgeType: (NSString *)  name
directed: (BOOL)  directed
neighbors: (BOOL)  neighbors 

Creates a new edge type.

Parameters
name[in] Unique name for the new edge type.
directed[in] If TRUE, this creates a directed edge type, otherwise this creates a undirected edge type.
neighbors[in] If TRUE, this indexes neighbor nodes, otherwise not.
Returns
Unique Sparksee type identifier.
- (long long) createEdgeWithAttributes: (int)  type
tailAttr: (int)  tailAttr
tailV: (STSValue *)  tailV
headAttr: (int)  headAttr
headV: (STSValue *)  headV 

Creates a new edge instance.

The tail of the edge will be any node having the given tailV Value for the given tailAttr attribute identifier, and the head of the edge will be any node having the given headV Value for the given headAttr attribute identifier.

Parameters
type[in] Sparksee type identifier.
tailAttr[in] Sparksee attribute identifier.
tailV[in] Value.
headAttr[in] Sparksee attribute identifier.
headV[in] Value.
Returns
Unique OID of the new edge instance.
- (long long) createNode: (int)  type

Creates a new node instance.

Parameters
type[in] Sparksee type identifier.
Returns
Unique OID of the new node instance.
- (int) createNodeType: (NSString *)  name

Creates a new node type.

Parameters
name[in] Unique name for the new node type.
Returns
Unique Sparksee type identifier.
- (int) createRestrictedEdgeType: (NSString *)  name
tail: (int)  tail
head: (int)  head
neighbors: (BOOL)  neighbors 

Creates a new restricted edge type.

Parameters
name[in] Unique name for the new edge type.
tail[in] Tail Sparksee node type identifier.
head[in] Head Sparksee node type identifier.
neighbors[in] If TRUE, this indexes neighbor nodes, otherwise not.
Returns
Unique Sparksee type identifier.
- (int) createSessionAttribute: (int)  type
dt: (enum STSDataType)  dt
kind: (enum STSAttributeKind)  kind 

Creates a new Session attribute.

Session attributes are exclusive for the Session (just its Session can use the attribute) and are automatically removed when the Session is closed (thus, attribute data is not persistent into the database).

Since they are not persistent, they cannot be retrieved from the database, so they do not have an identifier name.

Parameters
type[in] Sparksee node or edge type identifier.
dt[in] Data type for the new attribute.
kind[in] Attribute kind.
Returns
Unique Sparksee attribute identifier.
- (int) createSessionAttributeWithDefault: (int)  type
dt: (enum STSDataType)  dt
kind: (enum STSAttributeKind)  kind
defaultValue: (STSValue *)  defaultValue 

Creates a new Session attribute with a default value.

Session attributes are exclusive for the Session (just its Session can use the attribute) and are automatically removed when the Session is closed (thus, attribute data is not persistent into the database).

Since they are not persistent, they cannot be retrieved from the database, so they do not have an identifier name.

Parameters
type[in] Sparksee node or edge type identifier.
dt[in] Data type for the new attribute.
kind[in] Attribute kind.
defaultValue[in] The default value to use in each new node/edge.
Returns
Unique Sparksee attribute identifier.
- (long long) degree: (long long)  oid
etype: (int)  etype
dir: (enum STSEdgesDirection)  dir 

Gets the number of edges from or to the given node OID and for the given edge type.

Parameters
oid[in] Sparksee node OID.
etype[in] Sparksee edge type identifier.
dir[in] Direction.
Returns
The number of edges.
- (void) drop: (long long)  oid

Drops the given OID.

It also removes its egdges as well as its attribute values.

Parameters
oid[in] Sparksee OID to be removed.
- (void) dropWithObjects: (STSObjects *)  objs

Drops all the OIDs from the given collection.

See Drop method with the single OID parameter. This performs that call for all the elements into the collection.

Parameters
objs[in] Objects collection with the OIDs to be removed.
- (void) dumpData: (NSString *)  file

Dumps logical data to a file.

Parameters
file[in] Output file path.
Exceptions
System.IO.IOExceptionIf the given file cannot be created.
System.ApplicationExceptionnull
- (void) dumpStorage: (NSString *)  file

Dumps internal storage data to a file.

Parameters
file[in] Output file path.
Exceptions
System.IO.IOExceptionIf the given file cannot be created.
System.ApplicationExceptionnull
- (STSObjects*) edges: (int)  etype
tail: (long long)  tail
head: (long long)  head 

Gets all the edges of the given type between two given nodes (tail and head).

Parameters
etype[in] Sparksee edge type identifier.
tail[in] Tail node identifier.
head[in] Head node identifier.
Returns
Objects instance.
- (STSObjects*) explode: (long long)  oid
etype: (int)  etype
dir: (enum STSEdgesDirection)  dir 

Selects all edges from or to the given node OID and for the given edge type.

Parameters
oid[in] Sparksee node OID.
etype[in] Sparksee edge type identifier.
dir[in] Direction.
Returns
Objects instance.
- (STSObjects*) explodeWithObjects: (STSObjects *)  objs
etype: (int)  etype
dir: (enum STSEdgesDirection)  dir 

Selects all edges from or to each of the node OID in the given collection and for the given edge type.

Parameters
objs[in] Sparksee node OID collection.
etype[in] Sparksee edge type identifier.
dir[in] Direction.
Returns
Objects instance.
- (void) exportGraph: (NSString *)  file
type: (enum STSExportType)  type
em: (STSExportManager *)  em 

Exports the Graph.

Parameters
file[in] Output file.
type[in] Export type.
em[in] Defines how to do the export for each graph object.
Exceptions
System.IO.IOExceptionnull
- (int) findAttribute: (int)  type
name: (NSString *)  name 

Gets the Sparksee attribute identifier for the given type identifier and attribute name.

Parameters
type[in] Sparksee type identifier.
name[in] Unique attribute name.
Returns
The Sparksee attribute identifier for the given type and attribute name or InvalidAttribute if there is no attribute with the given name for the given type.
- (STSAttributeList*) findAttributes: (int)  type

Gets all existing Sparksee attribute identifiers for the given type identifier.

Parameters
type[in] Sparksee type identifier.
Returns
Sparksee attribute identifier list.
- (long long) findEdge: (int)  etype
tail: (long long)  tail
head: (long long)  head 

Gets any of the edges of the given type between two given nodes (tail and head).

If there are more than one, then any of them will be returned. And in case there are no edge between the given tail and head, the Objects InvalidOID will be returned.

Parameters
etype[in] Sparksee edge type identifier.
tail[in] Tail node identifier.
head[in] Head node identifier.
Returns
Any of the edges or the Objects InvalidOID.
- (STSTypeList*) findEdgeTypes

Gets all existing Sparksee edge type identifiers.

Returns
Sparksee edge type identifier list.
- (STSTypeList*) findNodeTypes

Gets all existing Sparksee node type identifiers.

Returns
Sparksee node type identifier list.
- (long long) findObject: (int)  attr
value: (STSValue *)  value 

Finds one object having the given Value for the given attribute.

If there are more than one, then any of them will be returned. And in case there are no object having this Value, the Objects InvalidOID will be returned.

Parameters
attr[in] Sparksee attribute identifier.
value[in] Value.
Returns
Sparksee OID or the Objects InvalidOID.
- (long long) findOrCreateEdge: (int)  etype
tail: (long long)  tail
head: (long long)  head 

Gets any of the edges of the specified type between two given nodes (tail and head).

If it can not find any edge of this type between them it tries to create a new one.

Parameters
etype[in] Sparksee edge type identifier.
tail[in] Tail node identifier.
head[in] Head node identifier.
Returns
Any of the edges or the Objects InvalidOID.
- (long long) findOrCreateObject: (int)  attr
value: (STSValue *)  value 

Finds one object having the given Value for the attribute or it creates one does not exist any.

If the attribute is a node or edge attribute and at least one node/edge with that value is found, it returns one of them. But if it does not exist, then: If it's a node attribute it will create it and set the attribute. If it's an edge attribute it will return the InvalidOID.

Using this method with a global attribute will return the InvalidOID.

Parameters
attr[in] Sparksee attribute identifier.
value[in] Value.
Returns
Sparksee OID or the Objects InvalidOID.
- (int) findType: (NSString *)  name

Gets the Sparksee type identifier for the given type name.

Parameters
name[in] Unique type name.
Returns
The Sparksee type identifier for the given type name or the Type InvalidType if there is no type with the given name.
- (STSTypeList*) findTypes

Gets all existing Sparksee node and edge type identifiers.

Returns
Sparksee node and edge type identifier list.
- (STSAttribute*) getAttribute: (int)  attr

Gets information about the given attribute.

Parameters
attr[in] Sparksee attribute identifier.
Returns
The Attribute for the given Sparksee attribute identifier.
- (long long) getAttributeIntervalCount: (int)  attr
lower: (STSValue *)  lower
includeLower: (BOOL)  includeLower
higher: (STSValue *)  higher
includeHigher: (BOOL)  includeHigher 

Gets how many objects have a value into the given range for the given attribute.

This only works for the attributes with the AttributeKind Indexed or Unique.

Given values must belong to the same DataType than the attribute.

Parameters
attr[in] Sparksee attribute identifier.
lower[in] Lower bound Value of the range.
includeLower[in] If TRUE, include lower bound Value of the range.
higher[in] Higher bound Value of the range.
includeHigher[in] If TRUE, include higher bound Value of the range.
Returns
Number of objects having a value into the given range.
- (void) getAttributeInValue: (long long)  oid
attr: (int)  attr
value: (STSValue *)  value 

Gets the Value for the given attribute and OID.

Parameters
oid[in] Sparksee OID.
attr[in] Sparksee attribute identifier.
value[in|out] Value for the given attribute and for the given OID.
- (STSAttributeList*) getAttributes: (long long)  oid

Gets all Sparksee attribute identifiers with a non-NULL value for the given Sparksee OID.

Parameters
oid[in] Sparksee OID.
Returns
Sparksee attribute identifier list.
- (STSAttributeStatistics*) getAttributeStatistics: (int)  attr
basic: (BOOL)  basic 

Gets statistics from the given attribute.

Parameters
attr[in] Sparksee attribute identifier.
basic[in] If FALSE all statistics are computed, if TRUE just those statistics marked as basic will be computed (see description of the AttributeStatistics class). Of course, computing just basic statistics will be faster than computing all of them.
Returns
An AttributeStatistics instace.
- (STSTextStream*) getAttributeText: (long long)  oid
attr: (int)  attr 

Gets the read-only TextStream for the given text attribute and OID.

Parameters
oid[in] Sparksee OID.
attr[in] Sparksee attribute identifier.
Returns
A TextStream. This returns a TextStream to read.
- (STSValue*) getAttributeWithOid: (long long)  oid
attr: (int)  attr 

Gets the Value for the given attribute and OID.

The other version of this call, where the Value is an output parameter instead of the return, is better because it allows the user to reuse an existing Value instance, whereas this call always creates a new Value instance to be returned.

It never returns NULL. Thus, in case the OID has a NULL value for the attribute it returns a NULL Value instance.

Parameters
oid[in] Sparksee OID.
attr[in] Sparksee attribute identifier.
Returns
A new Value instance having the attribute value for the given OID.
- (STSEdgeData*) getEdgeData: (long long)  edge

Gets information about an edge.

Parameters
edge[in] Sparksee edge identifier.
Returns
An EdgeData instance.
- (long long) getEdgePeer: (long long)  edge
node: (long long)  node 

Gets the other end for the given edge.

Parameters
edge[in] Sparksee edge identifier.
node[in] Sparksee node identifier. It must be one of the ends of the edge.
Returns
The other end of the edge.
- (int) getObjectType: (long long)  oid

Gets the Sparksee node or edge type identifier for the given OID.

Parameters
oid[in] Sparksee OID.
Returns
Sparksee node or edge type identifier.
- (STSType*) getType: (int)  type

Gets information about the given type.

Parameters
type[in] Sparksee type identifier.
Returns
The Type for the given Sparksee type identifier.
- (STSValues*) getValues: (int)  attr

Gets the Value collection for the given attribute.

Parameters
attr[in] Sparksee attribute identifier.
Returns
Returns a Values object.
- (STSObjects*) heads: (STSObjects *)  edges

Gets all the heads from the given edges collection.

Parameters
edges[in] Sparksee edge identifier collection.
Returns
The heads collection.
- (void) indexAttribute: (int)  attr
kind: (enum STSAttributeKind)  kind 

Updates the index of the given attribute.

This just works if the current index of the attribute corresponds to the AttributeKind Basic and the new one is Indexed or Unique.

Parameters
attr[in] Sparksee attribute identifier.
kind[in] Attribute kind.
- (STSObjects*) neighbors: (long long)  oid
etype: (int)  etype
dir: (enum STSEdgesDirection)  dir 

Selects all neighbor nodes from or to the given node OID and for the given edge type.

Parameters
oid[in] Sparksee node OID.
etype[in] Sparksee edge type identifier.
dir[in] Direction.
Returns
Objects instance.
- (STSObjects*) neighborsWithObjects: (STSObjects *)  objs
etype: (int)  etype
dir: (enum STSEdgesDirection)  dir 

Selects all neighbor nodes from or to each of the node OID in the given collection and for the given edge type.

Parameters
objs[in] Sparksee node OID collection.
etype[in] Sparksee edge type identifier.
dir[in] Direction.
Returns
Objects instance.
- (void) removeAttribute: (int)  attr

Removes the given attribute.

Parameters
attr[in] Sparksee attribute identifier.
- (void) removeType: (int)  type

Removes the given type.

This fails if there exist attributes defined for the type or if there exist restricted edges referencing this type.

Parameters
type[in] Sparksee type identifier.
- (void) renameAttribute: (int)  attr
newName: (NSString *)  newName 

Renames an attribute.

The new name must be available.

Parameters
attr[in] Sparksee attribute identifier.
newName[in] The new name for the attribute.
- (void) renameType: (int)  type
newName: (NSString *)  newName 

Renames a type.

The new name must be available.

Parameters
type[in] The type to be renamed.
newName[in] The new name for the type.
- (void) renameTypeWithName: (NSString *)  oldName
newName: (NSString *)  newName 

Renames a type.

The new name must be available.

Parameters
oldName[in] The current name of the type to be renamed.
newName[in] The new name for the type.
- (STSObjects*) selectWithAttrValue: (int)  attr
cond: (enum STSCondition)  cond
value: (STSValue *)  value 

Selects all OIDs satisfying the given condition for the given attribute.

Parameters
attr[in] Sparksee attribute identifier.
cond[in] Condition to be satisfied.
value[in] Value to be satisfied.
Returns
Objects instance.
- (STSObjects*) selectWithAttrValueRestriction: (int)  attr
cond: (enum STSCondition)  cond
value: (STSValue *)  value
restriction: (STSObjects *)  restriction 

Selects all OIDs satisfying the given condition for the given attribute.

Parameters
attr[in] Sparksee attribute identifier.
cond[in] Condition to be satisfied.
value[in] Value to be satisfied.
restriction[in] Objects to limit the select in this set of objects.
Returns
Objects instance.
- (STSObjects*) selectWithAttrValues: (int)  attr
cond: (enum STSCondition)  cond
lower: (STSValue *)  lower
higher: (STSValue *)  higher 

Selects all OIDs satisfying the given condition for the given attribute.

This allows to perform the Between operation, thus it has two Value arguments.

Parameters
attr[in] Sparksee attribute identifier.
cond[in] Condition to be satisfied. It must be the Between Condition.
lower[in] Lower-bound Value to be satisfied.
higher[in] Higher-bound Value to be satisfied.
Returns
Objects instance.
- (STSObjects*) selectWithAttrValuesRestriction: (int)  attr
cond: (enum STSCondition)  cond
lower: (STSValue *)  lower
higher: (STSValue *)  higher
restriction: (STSObjects *)  restriction 

Selects all OIDs satisfying the given condition for the given attribute.

This allows to perform the Between operation, thus it has two Value arguments.

Parameters
attr[in] Sparksee attribute identifier.
cond[in] Condition to be satisfied. It must be the Between Condition.
lower[in] Lower-bound Value to be satisfied.
higher[in] Higher-bound Value to be satisfied.
restriction[in] Objects to limit the select in this set of objects.
Returns
Objects instance.
- (STSObjects*) selectWithType: (int)  type

Selects all OIDs belonging to the given type.

Parameters
type[in] Sparksee type identifier.
Returns
Objects instance.
- (void) setAttribute: (long long)  oid
attr: (int)  attr
value: (STSValue *)  value 

Sets the Value for the given attribute and OID.

Parameters
oid[in] Sparksee OID.
attr[in] Sparksee attribute identifier.
value[in] Value for the given attribute and for the given OID.
- (void) setAttributeDefaultValue: (int)  attr
value: (STSValue *)  value 

Sets a default value for an attribute.

The default value will be applied to all the new nodes or edges.

The given value must have the same DataType as the attribute or be a NULL value to remove the current default value.

Parameters
attr[in] The attribute.
value[in] The default value to use for this attribute.
- (void) setAttributeText: (long long)  oid
attr: (int)  attr
tstream: (STSTextStream *)  tstream 

Sets the writable TextStream for the given text attribute and OID.

Parameters
oid[in] Sparksee OID.
attr[in] Sparksee attribute identifier.
tstream[in] New Text value. This corresponds to a TextStream to write.
- (STSObjects*) tails: (STSObjects *)  edges

Gets all the tails from the given edges collection.

Parameters
edges[in] Sparksee edge identifier collection.
Returns
The tails collection.
- (void) tailsAndHeads: (STSObjects *)  edges
tails: (STSObjects *)  tails
heads: (STSObjects *)  heads 

Gets all the tails and heads from the given edges collection.

Parameters
edges[in] Sparksee edge identifier collection.
tails[in|out] If not NULL, all the tails will be stored here.
heads[in|out] If not NULL, all the heads will be stored here.

The documentation for this class was generated from the following file: